C6 Waterproof Agent EE-6310

Short Description:

EE-6310 is a fluorocarbon polymer emulsion based on C6 mechanism.It has very low surface tension and can give the fabric good waterproof properties.

1. Suitable for waterproof finishing of various high-density fabrics

2. Can be used in the same bath with super soft additives

3. Good processing sustainability

4. Excellent waterproof effect

5.Without APEO/ PFOS/PFOA

Send email to us

Product Detail

Application scope

Product Tags

Characteristics：

Appearance: Milky white liquid
Solid content: 12%
Ionicity: weak cation
PH value:3-6
Solubility: Dispersible in water at any proportion

Reference Dosage：

Polyester fabric: 10g/L~20g/L (170℃×1min)
Nylon fabric: 15g/L~25g/L (170℃×1min)
Polyester-cotton fabric: 15g/L~35g/L (170℃×2min)

Precautions：

1.Before mixing with other additives, the compatibility should be confirmed through preliminary tests.
2. When there are hydrophilic substances left in the previous processing on the processing cloth, the processing effect will be affected, so the cloth before waterproof and oil-proof processing must be cleaned; Baking must be sufficient during processing.
3. If baking is required during processing, the baking should be sufficient, otherwise it will affect its performance.
4. Please use up the working fluid containing waterproofing agent and mixed chemicals within 12 hours. The stability and performance of the working fluid left for a long time must be confirmed before use.
5. Please use it as soon as possible after opening, and pay attention to sealing to prevent evaporation and avoid open flames and direct exposure to the sun.
6. The storage temperature is between 5℃~40℃ and avoid freezing.