head_banner

Spray Solvent-based Waterproof Agent M-600 (C6)

Spray Solvent-based Waterproof Agent M-600 (C6)

Short Description:

M-600 is a high molecular polymer emulsion based on silicone system.Needs to be diluted with solvents such as ethyl acetate for use.

1. Can be sprayed on various textiles, leather, synthetic leather, paper, shoe materials and other substrates

2. Can be diluted with petroleum solvents in any proportion

3. Excellent water repellent effect can be achieved after natural drying


Product Detail

Application scope

Product Tags

 

Solvent-Based Water Repellent M-600

is widely used in varies of textiles、leather、synthetic leather、ceramic、paper、woodwork、stonework, and any other substrates, with the finishing performance of anti-water, water repellent, oil repellent and dust proof, the substrates can keep its original appearance, permeability and touch.

 

Application:

Substrates of textiles, leather, synthetic leather, paper, wood works, stone works, etc.

 

Usage

  1. Make sure whether M-600 is completely dissolved or not. It will get freeze if stored below 15.fill warm water in the sink for heating to completely dissolve M-600 before use. Dilute 1 part of M-600 with 4-20 parts of diluent. N-decane or D40 and any other petroleum solvents(boiling point 150-200) can be chosen as diluent.
  2. Completely drying the substrates and coat the prepared solution uniformly at the ratio of 200k/ on the surface of the substrates at the home temperature. Depending on different kinds of substrates, wipe it after coating 10 minutes if it’s necessary.
  3. Store at room temperature for 24 hours and then get drying.

  • Previous:
  • Next:

  • Application scope of this product: polyester, nylon, cotton, polyester/cotton, polyester/viscose and other fabrics.

    微信图片_20240801151600

  • Write your message here and send it to us