Waterproof Oil-repellent Agent for Paper Molding FP-602

Short Description:

FP-602 is a fluorine-containing oil repellent specifically used for pulp molding, which can endow pulp molding products with effective high-temperature oil repellent effect

1. Long term effective prevention of high-temperature edible oil penetration

2. Food grade products that can come into direct contact with food

3. C6 products do not contain harmful substances such as PFOS, PFOA, etc

Send email to us

Product Detail

Application scope

Product Tags

Characteristics：

Appearance: Light yellow liquid
Solid content: 30%
Ionicity: cation
PH value:3.5-5.5
Solubility: Dispersible in water at any proportion

Reference Dosage：

Addition amount: 0.5~1.5%
Add method:
A) Add point: in the slurry tank or raw material tank
B) Order: If there are other compatible waterproofing agents, water-resistant agents, etc., place this product at the end and add it

Precautions：

1.When adding in the pulper or slurry mixing tank, add the waterproofing agent first, then add the oil-proofing agent, or mix the two and add them at the same time.
2.This product and the imported oil repellent can dissolve each other, and there will be no delamination or conflict leading to failure.
3.This product can be mixed with imported oil retardants and has a certain synergistic effect.
4.After opening and removing the barrel, it needs to be resealed. The removed liquid should be sealed as much as possible or diluted with water and stored in the open, otherwise there is a possibility of scabs forming on the surface.
5.This product is slightly acidic. After contact with skin, rinse with water as soon as possible. Prolonged skin contact may cause skin sloughing.

Previous:

Next: Spray Solvent-based Waterproof Agent M-400 (C8)

Application scope of this product:Sugar cane pulp, wood pulp, straw pulp, bamboo pulp and other plant fibers

food wrapping paper